
Wall dehumidifier in a hallway: position, access and coverage
November 11, 2026
Customer ATE installation in Le Tampon: the practical details
November 18, 2026Made in France, two ranges—ATE and ATG—and a 10-year warranty: discover Humidistop devices intended for walls affected by rising damp.
Peeling paint, damaged plaster, salt deposits and damp at the base of walls can make a home less comfortable and complicate renovation. Once rising damp has been identified, a wall-drying device may be considered.
Humidistop offers several models for different building layouts. ATE devices require mains power; ATG devices operate without an electrical supply.
Rising damp: understand the source of moisture
Rising damp is the movement of groundwater through porous masonry by capillary action. It can affect older houses, stone or brick walls, and buildings without an effective damp-proof course.
Salt deposits and damaged plaster alone do not establish the cause. Leaks, penetrating damp and condensation need different responses. Identifying the source of moisture helps determine which treatment is appropriate.
What are devices for rising damp called?
Manufacturers and suppliers use several names:
- Polarity inverter for damp walls.
- Electromagnetic polarity inverter.
- Geomagnetic polarity inverter.
- Anti-rising-damp device.
- Wall-drying device.
- Masonry drying unit.
- Injection-free damp treatment system.
These terms describe different products marketed for rising damp. Compare their technology, power requirements, stated coverage and installation conditions. A device intended for damp masonry should not be confused with an air dehumidifier.
ATE: mains-powered electromagnetic devices
The ATE range includes ATE LC15, ATE LC30, ATE LC30 PULSE and ATE MAX. Their different stated coverage diameters allow you to compare options according to the building layout.
Installing the device does not involve injecting resin along the entire wall. Its position and use must follow the model’s installation instructions. Accessible documentation helps you prepare the installation before placing your device.
ATG: geomagnetic devices without an electrical connection
ATG LC15 and ATG LC30 are marketed as geomagnetic polarity inverters. They operate without an electrical supply, offering another option within the Humidistop range when avoiding a mains connection is a selection criterion.
Choosing between ATE and ATG means considering the building, the area to cover and the model-specific conditions of use.
Why choose Humidistop?
Made in France
Humidistop devices are manufactured in France, providing a clear point of reference for customers who want to know where their equipment comes from.
A 10-year warranty
The devices come with a 10-year warranty under the conditions applicable to the model. Check the terms and exclusions before purchasing.
Several models and coverage options
A single room and a larger building do not have the same requirements. Compare dimensions and layout rather than automatically choosing the largest model. Always distinguish radius from diameter: a stated coverage diameter is not a floor area in square metres.
Installation without resin injections
The device is installed without injecting resin into the masonry. This does not rule out repairs, adequate ventilation or replastering where the condition of the building requires them.
Accessible prices and instructions
Product information lets you consult displayed prices, compare specifications and read installation instructions before ordering.
Wall drying: allow for gradual change
A thick wall containing substantial moisture does not dry instantly. Materials, wall thickness, ventilation and any additional water ingress influence progress. Monitoring the walls over time helps you plan finishing work at an appropriate stage.
A device intended for rising damp does not repair a leak or replace measures to address water ingress.
Find your Humidistop wall-drying device
Looking for an electromagnetic polarity inverter or a geomagnetic system without a mains connection? Compare ATE and ATG: made in France, a 10-year warranty and models for different building configurations.
Explore the ATE and ATG ranges and contact Humidité Conseil for advice.




