ATE Pulse White | Wall Drying | Treatment of Wall Moisture

Electromagnetic Wall Drying System ATE PULSE 30 – Wall Drying and Rising Damp

Wall moisture is often linked to rising damp: water contained in the ground naturally rises through porous materials (brick, stone, mortar), causing damp walls, salt deposits, mold, odors, and discomfort.

This is a wall moisture control device designed to help dry damp walls and treat rising damp, without injecting chemicals and without invasive work. It uses polarity inverter technology, with a discreet design (limited edition) made to blend easily into any interior.

Thanks to electromagnetic polarity inversion, it acts at the source of the phenomenon and promotes a gradual action over time on masonry moisture, helping preserve materials and improve building comfort.

📐 Performance of the ATE PULSE 30 model

Operating radius: 15 meters

Maximum operating diameter: 30 meters

Technology: electromagnetic

Design: clean white model – limited edition

Manufacturing: Made in France

Delivery: free and fast

📄 ATE PULSE 30 user manuals

Download the installation manual in your language:

🇫🇷 French – Download the manual

🇬🇧 English – Download the manual

🇩🇪 German – Download the manual

🇮🇹 Italian – Download the manual

🇵🇹 Portuguese – Download the manual

🇪🇸 Spanish – Download the manual

⚙️ How does the ATE PULSE 30 work?

This system emits low electrical impulses. These signals help invert polarity within the masonry, promoting a gradual downward movement of moisture toward the foundations.

This process works effectively on:

rising damp

damp porous walls

It does not treat water infiltration: in the event of lateral infiltration, drainage or repairing the root cause is essential.

🧱 Simple, silent, and nuisance-free installation

No dust, no noise

No harmful electromagnetic field

Power consumption: 0.75 W (≈ €15/year)

Manufacturer’s warranty: 10 years

Dimensions: 272 x 206 x 25 mm

Voltage: 12V

This device is fixed directly to a damp load-bearing wall or internal structural wall, 30 cm to 1 m above the floor. Do not install on a lining (drywall, insulation…). It must remain plugged in continuously.

✅ Key benefits of the ATE PULSE 30

Long-lasting drying of damp walls

Discreet, modern design

Visible results between 18 and 24 months

No nuisance to health (Emitech certified)

Quick installation

High-quality French manufacturing

🔍 Usage tips for optimal results

1. Correct installation

Fix the device to a load-bearing wall, away from other electrical equipment.

2. Strip back wall finishes

Remove waterproof coverings 10 cm above the damp area to allow evaporation.

3. Ventilate the home

Ensure good ventilation (VMC/mechanical ventilation, door undercutting, air vents…) to support natural evaporation.

4. Restore the walls

After drying, brush off surface salts and redo the renders using suitable products (lime + anti-salt).

5. Drainage if necessary

Plan drainage if lateral infiltration is present at the base of the wall.

📜 Certifications

Directive 2014/35/EU (low voltage)

Directive 2014/30/EU (EMC)

Directive 2011/65/EU (RoHS)

Directive 2012/19/EU (WEEE)

Certified as non-harmful to health (EMF waves tested by Emitech)

ℹ️ Additional information

Treatment effectiveness depends on several factors: wall type, finishes, ventilation, and compliance with installation guidelines.

It does not treat water infiltration, mold, or damage caused by flooding: these issues must be handled separately.