ATE Pulse White – Electromagnetic Device for Rising Damp

ATE LC30 PULSE White – Electromagnetic device for wall drying

Discover the ATE LC30 Pulse, a next-generation electromagnetic anti-damp device designed to effectively combat rising damp and wall moisture. This limited-edition model delivers the same performance as the standard versions, with a more modern and discreet design.

Understanding rising damp

Rising damp is a common issue: ground moisture rises through porous materials such as brick, stone, or mortar. The device acts directly at the source: it reverses the electromagnetic polarity of water molecules, pushing moisture back down towards the ground — with no chemicals and no invasive work.

Key benefits of the ATE LC30 Pulse

Range: 15 metres

Coverage diameter: 30 metres

Continuous, silent operation

Maintenance-free

Made in France – 10-year warranty

Fast, free delivery

ATE PULSE 30 user manuals

Download the installation manual in your language:

English – Download the manual

ATE LC30 PULSE – A smart solution against wall damp

Why wall damp matters

Moisture can damage structures, cause mould, and increase heating costs. One of the main causes is rising damp, which occurs when ground water rises into porous materials due to the lack of a waterproof barrier.

A modern answer:

This device dries walls naturally, with no drilling and no chemicals. Thanks to certified low-frequency impulses, it reverses the moisture flow inside the wall and promotes long-lasting drying.

How it works

Damp walls generate a natural upward electrical field. The device emits an inverse electromagnetic field, changing the direction of water within the wall. Moisture is pushed back down towards the ground and gradually evaporates.

The process is completely silent, vibration-free, and maintenance-free. Ideal for fragile or old walls.

Performance and benefits

Treats rising damp at the source

Visible results in 18 to 24 months

Non-harmful waves (EMF certified)

Extremely low consumption: 0.75 W (~€15/year)

Made in France with a 10-year warranty

Free, fast delivery

Technical specifications

Range: 15 metres (30 m diameter)

Dimensions: 272 × 206 × 25 mm

Power supply: 12 V – 0.75 W

Wall mounting: like a picture frame

Install on load-bearing walls, preferably damp (not on lining/“doublage”)

Certifications:

Low Voltage Directive 2014/35/EU

EMC Directive 2014/30/EU

RoHS Directive 2011/65/EU

WEEE Directive 2012/19/EU

EMF test – Emitech laboratory (safe waves)

Installation recommendations

Place the device between 30 cm and 1 m above the floor

Keep at least 1.50 m away from any other electronic device

Securely fix it to a load-bearing wall

Keep the device plugged in permanently

Measure the room’s maximum diagonal (max coverage 30 m)

Best practices for faster drying

Remove waterproof coatings 10 cm above damp areas

Ensure good ventilation (natural or mechanical)

Adjust doors and add vents if necessary

Restore with a lime plaster and an anti-salt additive

Add drainage in case of lateral water pressure

Important information

Results depend on the material, thickness, surface treatment, and wall installation conditions.

The device does not treat:

Water infiltration/leaks

Flooding

Surface mould

These issues must be resolved separately to ensure complete effectiveness.