ATE LC15 Light Grey | Wall Drying | Treatment of Wall Moisture

Electromagnetic wall drying system ATE LC15 LIGHT GREY – Wall drying and rising damp

Electromagnetic wall drying: an innovative solution

Wall moisture is often linked to rising damp: water contained in the ground naturally rises through porous materials (brick, stone, mortar), especially in buildings without a capillary break. This can lead to damp walls, salt deposits, mold, odors, and discomfort.

This is a wall moisture device designed to help dry damp walls and treat rising damp, without destructive work and with no maintenance. Compact and easy to install, it is suitable for medium-sized areas, single-story homes, or partially affected zones.

Thanks to its electromagnetic polarity inversion technology, it acts at the source of the phenomenon and promotes a gradual action over time on masonry moisture.

📐 Performance of the ATE LC15 model

Operating radius: 7.5 meters

Maximum operating diameter: 15 meters

Technology: electromagnetic

Manufacturing: Made in France

Delivery: free and fast

📄 ATE LC15 user manuals

Download the installation manual in your language:

French – Download the manual

English – Download the manual

German – Download the manual

Italian – Download the manual

Portuguese – Download the manual

Spanish – Download the manual

⚙️ How does the ATE LC15 work?

This system generates a low-frequency electromagnetic field that helps invert the natural polarity within the masonry. This process promotes a gradual downward movement of moisture toward the ground.

This operation helps address:

damp walls due to capillary rise

porous materials in contact with the ground

partially affected areas or small rooms

🧱 Simple, nuisance-free installation

No noise, no dust

No harmful electromagnetic field

Power consumption: 0.75 W (≈ €15/year)

Voltage: 12V

Dimensions: 190 x 190 x 32 mm

Manufacturer’s warranty: 10 years

It is fixed directly to a damp load-bearing wall or internal structural wall, 30 cm to 1 m above the floor. Do not install on a lining (drywall, insulation…). It must remain plugged in continuously.

✅ Key benefits of the ATE LC15

Helps address wall moisture at the source

Ideal for medium-sized homes or partially affected areas

Visible results between 18 and 24 months

Suitable for older and newer buildings

Safe for health (Emitech certified)

Quick installation

🔍 Usage tips for maximum effectiveness

1. Install on a load-bearing wall

Keep 1.50 m away from any electrical equipment and install on a wall without lining.

2. Strip back the base of the wall

Remove waterproof coverings or damaged plaster 10 to 15 cm above the damp areas.

3. Mandatory ventilation

Actively ventilate the home to allow evaporation: mechanical ventilation (VMC), door undercutting, air vents.

4. Wall restoration

After drying, brush off surface salts and redo the plaster with suitable products (lime + anti-salt additive).

5. Drainage in case of infiltration

In case of lateral infiltration, drainage may be necessary (the device does not treat infiltration).

📜 Certifications

Directive 2014/35/EU (low voltage)

Directive 2014/30/EU (EMC)

Directive 2011/65/EU (RoHS)

Directive 2012/19/EU (WEEE)

Certified non-harmful to health (EMF waves tested by Emitech)

ℹ️ Additional information

Device effectiveness depends on several factors: ventilation, wall type, finishes, and compliance with recommendations.

This device does not treat infiltration, flooding, or existing mold. These issues must be handled separately.